BS Technology Pte Ltd
  • Home
  • Courses
    • WSQ Perform Rigger and Signalman Tasks
    • WSQ Supervise Safe Lifting Operations
    • WSQ Operate Boom Lift
    • WSQ Operate Scissor Lift
    • WSQ Operate Vertical Personnel Platform
    • HAZMAT Transport Driver Course
    • Crawler Crane Inspection Course
    • Mass Flow Meter For Billing Quantity
    • Mini Crane Operation Course
    • IPAF MEWPs for Managers (E-Learning)
    • Environmental Infection Control And Management For COVID-19
    • Overseas Training Center
  • Training Facilities
  • Online Registration
    • WSQ Courses Registration
    • Hazmat Course Registration
    • Crawler Crane Inspection Course
    • Mass Flow Meter For Billing Quantity
  • Safe Distancing Measures
  • Contact Us

WELCOME TO

BS TECHNOLOGY PTE LTD

BS Technology Pte Ltd is an Approved Training Organisation (ATO) by SkillsFuture Singapore Agency. It provides experienced adult educators in the lifting industry and has an excellent reputation for delivering quality training which makes tangible differences to the employees and employers by encouraging continual improvement to meet the business and safety needs for the individual.

Covid-19: Enhanced Precautionary Measures

We are truly concerned about the health and safety of our trainees and staff.

As Singapore moves into Post Circuit Breaker Phase Two, BS TECHNOLOGY implements required safety measures
as recommended by the Ministry of Health (MOM) as per their latest health advisory.


Phase Two Safety Measures as Stated Below


(BS TECHNOLOGY has officially started to take place the following measures to ensure the safety of our trainees and staff)

All customer service counters and walk-in registration remain closed.
        (This is to minimise physical contact with each other, meanwhile customers can still make a phone call and send emails to our centre         for any further enquiries or clarification on the courses.)


Training centre is cleaned and sanitize on daily basis.
       (Cleaning process will be increased than usual and hand sanitizer will be available in the required spaces.


Safe entry check in and check out is compulsory for all trainees and staff.
       (Trainees are not allowed to enter the training premises without safe entry check-in; this is to help government to trace any        individual in the case of any emergency.)


Temperature checks will take place for all staff and trainees.
       (The checking will take place twice in a day which are morning and afternoon. Those trainees temperature cross 37.5 degree will not        be allowed to attend the training and will automatically be sent to the clinic.)


Health and travel declaration will be done for all staff and trainees.
       (To ensure on the trainees past travel history for a safety purpose.)


All trainees and staff are required to wear face mask.
       (The use of masks will continue to be mandatory when people go outside their homes. The use of masks that closely and completely        cover the nose and mouth will be required as a default.)


Seats in the classrooms and common areas are marked to adhere the safe distancing rule.
       (All the classrooms and common areas are marked according to the 1 meter distance to minimise direct interactions with one and        other. Trainees are not allowed to talk in their mobile phones at the training premises as well.)


Break time and practical sessions are staggered.
       (This is to minimize the number of individuals gathered at the same place, at the same time.)


Trainees are encourgaed to bring their own PPEs for practical sessions.
       (Trainees should observe good personal hygiene and avoid sharing of PPE.)
Download Here

WSQ Perform Rigger and Signalman Tasks



Provide individuals with the knowledge and skills to prepare and to tie the load for safe lifting by any form of lifting equipment using correct and clear signals to guide the crane operator in the manoeuvring of a load safely to its destination.

Book Now



WSQ Perform Rigger and Signalman Tasks

Course Reference Number: CRS-Q-0027383-MF
Funding Validity Period: 14 Sep 2015 to 30 Apr 2022
Course Fee: S$200.00 (before GST)
Mode of Training: Classroom & Practical
Mode of assessment: Written Assessment & Practical Assessment



Learning Objectives:

Performing Rigger and Signalman Tasks Course is designed to build the knowledge, skills and attitudes of all lifting personnel to increase the standards of operations and increase safety awareness when performing lifting operations as a Rigger and a Signalman.

This course is intended to equip the participants with the understanding of rigging and signaling and the knowledge and skills to manoeuvre a load safely to its destination, in a much safer work environment.

Who should attend?

For individuals who are assigned to carry out the lifting operation of load involving a mobile crane or tower crane. This is also a mandatory course in line with Workplace Safety and Health (Operation of Cranes) Regulations.

Course Duration

2 Day Course:
Training Hours: 16 hrs
Assessment Hours: 1.5 hrs

Medium of Instruction
English
Mandarin
Tamli
Bahasa Indonesia


Certification Obtained and Conferred By:

Statement of Attainment issued by SSG to candidates who met assessment requirements.
Safety Pass



Course Content:

Legislations, roles and responsibilities in a lifting operation
Toolbox meeting
Estimating load and centre of gravity
Pre-lift inspection of crane and lifting gear and accessories
Selection and use of rigging equipment
Rigging methods and techniques
3-step lifting and lowering method
Set-up and restore communication equipment
Ensuring safe lifting operation
Emergency response procedures
Standard signaling
Reinstate rigger and signalman work area



Assumed Attitude, Skills And Knowledge

The assumed skills and knowledge for this unit are as follows. Learners are assumed to:

Have basic knowledge of the relevant sector of work;
Be able to listen and speak English at a proficiency level equivalent to the Employability Skills (ES) level 2;
Be able to read and write English at a proficiency level equivalent to
ES level 2;
Be able to manipulate numbers at a proficiency level equivalent to
ES level 2;
Be medically fit
Learners must be above 18 years of age


Funding Information:

This course is applicable for SkillsFuture Funding.

Company-sponsored participants (Singaporeans & PR) may apply directly through SSG via SkillsConnect @ www.skillsconnect.gov.sg for SDF.
(Maximum funding up to 90%)
Terms and conditions apply.


All Singaporeans aged 25 and above can use their SkillsFuture Credit from the government to pay for the approved skills-related courses. Visit the SkillsFuture Credit website (www.skillsfuture.sg/credit) to choose from the course available on the Training Exchange couse directory.

WSQ Supervise Safe Lifting Operations



Provide individuals with the knowledge and skills to supervise safe lifting operations involving a mobile crane or tower crane or any other crane in the workplace.

Book Now



WSQ Supervise Safe Lifting Operations

Course Reference Number: CRS-Q-0027386-MF
Funding Validity Period: 14 Sep 2015 to 30 Apr 2022
Course Fee: S$250.00 (before GST)
Mode of Training: Classroom
Mode of assessment: Written Assessment



Learning Objectives:

Supervising Safe Lifting Operations course is aimed at providing participants with the knowledge and skills to supervise safe lifting operations involving a mobile crane or tower crane or any other crane in the workplace.

During the course, the participant will learn to perform the following:
1. Prepare to supervise safe lifting operations
2. carry out supervision of safe lifting operations
3. Supervise reinstatement of safe lifting operations

Who should attend?

Supervisors who are engaged in lifting operation involving a mobile crane or tower crane in the workplace. This is also a mandatory course in line with Workplace Safety and Health (Operation of Cranes) Regulations.

Course Duration

4 Day Course:
Training Hours: 32 hrs Assessment Hours: 3 hrs

Medium of Instruction
English
Mandarin


Certification Obtained and Conferred By:

Statement of Attainment issued by SSG to candidates who met assessment requirements.
Safety Pass



Course Content:

Legislation, roles & responsibilities
Planning for safe lifting operations
Pre-lift inspection of crane and lifting accessories
Safe slinging practice
Safe use of mobile cranes
Safe use of tower cranes
Safe use of other lifting machines
Lifting accidents and emergency response
Supervise reinstatement at the end of operation



Assumed Attitude, Skills And Knowledge

The assumed skills and knowledge for this unit are as follows. Learners are assumed to:

Have a basic knowledge of the relevant sector of work;
Have completed WSQ/MOM ATP Rigging and Signalman course;
Be able to listen and speak English at a proficiency level equivalent to the Employability Skills (ES) level 4;
Be able to read and write English at a proficiency level equivalent to
ES level 4;
Be able to manipulate numbers at a proficiency level equivalent to
ES level 4;
Be medically fit
Learners must be above 18 years of age


Funding Information:

This course is applicable for SkillsFuture Funding.

Company-sponsored participants (Singaporeans & PR) may apply directly through SSG via SkillsConnect @ www.skillsconnect.gov.sg for SDF.
(Maximum funding up to 90%)
Terms and conditions apply.


All Singaporeans aged 25 and above can use their SkillsFuture Credit from the government to pay for the approved skills-related courses. Visit the SkillsFuture Credit website (www.skillsfuture.sg/credit) to choose from the course available on the Training Exchange couse directory.

WSQ Operate Boom Lift



Book Now



WSQ Operate Boom Lift

Course Reference Number: CRS-Q-0027271-MF
Funding Validity Period: 14 Sep 2015 to 30 Apr 2022
Course Fee: S$250.00 (before GST)
Mode of Training: Classroom & Practical
Mode of assessment: Written Assessment & Practical Assessment



Learning Objectives:

Select an appropriate MEWP, including risk assessment for the task to be carried out
State the safety requirements under the Workplace Safety and Health Act and the Code of Practice for Working Safely At Height related to MEWP Carry out pre-start inspection
State factors affecting stability
Identify common hazards during traveling, setup, operation and parking of MEWP and their control measures
Conduct workplace inspection
State function of all MEWPs controls, including emergency controls and emergency procedures Use personal protective equipment appropriate to the task, worksite and environment after a risk assessment is conducted and according to the manufacturer's guidelines. Operate MEWP safely

Who should attend?

For individuals who are assigned to carry out the lifting operation of load involving a Lifting Machine. This is also a mandatory course under the Workplace Safety and Health (Operation of Cranes) Regulations.

Course Duration

1 Day Course:
Training Hours: 8 hrs
Assessment Hours: 1 hrs

Medium of Instruction
English
Mandarin
Malay
Tamli
Bengali


Certification Obtained and Conferred By:

WSQ Statement of Attainment issued by SSG to candidates who met assessment requirements.
Safety Pass
Validity: 5 years



Course Content:

What is MEWP?
Risk Management
MEWP Safety Legislative Requirements
Boom Lift
Pre-Start Inspections
Operation Safety
Emergency Response
End of MEWP operations



Assumed Attitude, Skills And Knowledge

The assumed skills and knowledge for this unit are as follows. Learners are assumed to:

Have a basic knowledge of the relevant sector of work;
Be able to listen and speak English at a proficiency level equivalent to the Employability Skills (ES) level 3;
Be able to read and write English at a proficiency level equivalent to
ES level 3;
Be able to manipulate numbers at a proficiency level equivalent to
ES level 3;
Be medically fit to work at height
Learners must be above 18 years of age


Funding Information:

This course is applicable for SkillsFuture Funding.

Company-sponsored participants (Singaporeans & PR) may apply directly through SSG via SkillsConnect @ www.skillsconnect.gov.sg for SDF.
(Maximum funding up to 90%)
Terms and conditions apply.


All Singaporeans aged 25 and above can use their SkillsFuture Credit from the government to pay for the approved skills-related courses. Visit the SkillsFuture Credit website (www.skillsfuture.sg/credit) to choose from the course available on the Training Exchange couse directory.

WSQ Operate Scissor Lift



Book Now



WSQ Operate Scissor Lift

Course Reference Number: CRS-Q-0027272-MF
Funding Validity Period: 14 Sep 2015 to 30 Apr 2022
Course Fee: S$250.00 (before GST)
Mode of Training: Classroom & Practical
Mode of assessment: Written Assessment & Practical Assessment



Learning Objectives:

Select an appropriate MEWP, including risk assessment for the task to be carried out
State the safety requirements under the Workplace Safety and Health Act and the Code of Practice for Working Safely At Height related to MEWP Carry out pre-start inspection
State factors affecting stability
Identify common hazards during traveling, setup, operation and parking of MEWP and their control measures
Conduct workplace inspection
State function of all MEWPs controls, including emergency controls and emergency procedures Use personal protective equipment appropriate to the task, worksite and environment as a result of a risk assessment conducted and according to the manufacturer's guidelines. Operate MEWP safely

Who should attend?

For individuals who are assigned to carry out the lifting operation of load involving a Lifting Machine. This is also a mandatory course under the Workplace Safety and Health (Operation of Cranes) Regulations.

Course Duration

1 Day Course:
Training Hours: 8 hrs
Assessment Hours: 1 hrs

Medium of Instruction
English
Mandarin
Tamil
Bengali


Certification Obtained and Conferred By:

WSQ Statement of Attainment issued by SSG to candidates who met assessment requirements.
Safety Pass
Validity: 5 years



Course Content:

What is MEWP?
Risk Management
MEWP Safety Legislative Requirements
Scissor Lift
Pre-Start Inspections
Operation Safety
Emergency Response
End of MEWP operations



Assumed Attitude, Skills And Knowledge

The assumed skills and knowledge for this unit are as follows. Learners are assumed to:

Have basic knowledge of the relevant sector of work;
Be able to listen and speak English at a proficiency level equivalent to the Employability Skills (ES) level 3;
Be able to read and write English at a proficiency level equivalent to
ES level 3;
Be able to manipulate numbers at a proficiency level equivalent to
ES level 3;
Be medically fit to work at height
Learners must be above 18 years of age


Funding Information:

This course is applicable for SkillsFuture Funding.

Company-sponsored participants (Singaporeans & PR) may apply directly through SSG via SkillsConnect @ www.skillsconnect.gov.sg for SDF.
(Maximum funding up to 90%)
Terms and conditions apply.


All Singaporeans aged 25 and above can use their SkillsFuture Credit from the government to pay for the approved skills-related courses. Visit the SkillsFuture Credit website (www.skillsfuture.sg/credit) to choose from the course available on the Training Exchange couse directory.

WSQ Operate Vertical Personnel Platform



Book Now



WSQ Operate Vertical Personnel Platform

Course Reference Number: CRS-Q-0027313-MF
Funding Validity Period: 14 Sep 2015 to 30 Apr 2022
Course Fee: S$250.00 (before GST)
Mode of Training: Classroom & Practical
Mode of assessment: Written Assessment & Practical Assessment



Learning Objectives:

Select an appropriate MEWP, including risk assessment for the task to be carried out
State the safety requirements under the Workplace Safety and Health Act and the Code of Practice for Working Safely At Height related to MEWP Carry out pre-start inspection
State factors affecting stability
Identify common hazards during traveling, setup, operation and parking of MEWP and their control measures
Conduct workplace inspection
State function of all MEWPs controls, including emergency controls and emergency procedures Use personal protective equipment appropriate to the task, worksite and environment as a result of a risk assessment conducted and according to the manufacturer's guidelines. Operate MEWP safely

Who should attend?

For individuals who are assigned to carry out the lifting operation of load involving a Lifting Machine. This is also a mandatory course under the Workplace Safety and Health (Operation of Cranes) Regulations.

Course Duration

1 Day Course:
Training Hours: 8 hrs
Assessment Hours: 1 hrs

Medium of Instruction
English
Mandarin


Certification Obtained and Conferred By:

WSQ Statement of Attainment issued by SSG to candidates who met assessment requirements.
Safety Pass
Validity: 5 years



Course Content:

What is MEWP?
Risk Management
MEWP Safety Legislative Requirements
Vertical personnel platform
Pre-Start Inspections
Operation Safety
Emergency Response
End of MEWP operations



Assumed Attitude, Skills And Knowledge

The assumed skills and knowledge for this unit are as follows. Learners are assumed to:

Have basic knowledge of the relevant sector of work;
Be able to listen and speak English at a proficiency level equivalent to the Employability Skills (ES) level 3;
Be able to read and write English at a proficiency level equivalent to
ES level 3;
Be able to manipulate numbers at a proficiency level equivalent to
ES level 3;
Be medically fit to work at height
Learners must be above 18 years of age


Funding Information:

This course is applicable for SkillsFuture Funding.

Company-sponsored participants (Singaporeans & PR) may apply directly through SSG via SkillsConnect @ www.skillsconnect.gov.sg for SDF.
(Maximum funding up to 90%)
Terms and conditions apply.


All Singaporeans aged 25 and above can use their SkillsFuture Credit from the government to pay for the approved skills-related courses. Visit the SkillsFuture Credit website (www.skillsfuture.sg/credit) to choose from the course available on the Training Exchange couse directory.

HAZMAT Transport Driver CourseHAZMAT Transport Driver Course




Book Now

Course Overview:

Hazmat Transport Drivers Training Course provides an introductory understanding with regards to the transportation of dangerous goods, such as the nine (9) classes of dangerous goods, various modes of transportation of DG in Singapore by a competent and qualified transporter as accreditated by SCDF. These safety training course will enable the drivers to understand the hazards that lead to emergency and how to handle emergency situations. In this training the participants will be shown how to prevent fires and respond to fires and spills whilst transporting DG.
All DG are classified into nine (9) primary classes and sub-divided into divisions which are taught during the course which will enable them to be familiar with the hazards associated with each classification.

Who should attend?

This course is designed for participants who are drivers transporting & handling of hazardous materials.

Course Duration

1 Day Course:
Training Hours: 8 hrs
Assessment Hours: 1 hrs

Medium of Instruction
English
Mandarin
Malay
Tamli


Funding Information:

Company-sponsored participants (Singaporeans & PR) may apply directly through SSG via SkillsConnect @ www.skillsconnect.gov.sg for SDF.
(Maximum funding up to 90%)
Terms and conditions apply.

Mini Crane Operation Course



Book Now



Mini Crane Operation Course

Who should attend?

For experienced workers, who are required to operate the Mini Crane machine in their workplace for lifting operation. This course is designed for candidates who intend to qualify to be a Multi-Skilled worker.

Course Duration

CSC Module 1: 1 Day - 8 hrs
CSC Module 2 : 3 Day - 20 hrs

SEC(K) : 1 Day - 8 hrs (Theory)
                         3 Day - 24 hrs (Practical)

Medium of Instruction
English


Certification Obtained and Conferred By:

Upon successful completion of the course, a Certificate / Result Slip endorsed by BCA will be issued to all participants.
Validity: 5 years



Course Content:

Introduction to Mini Cranes
Crane Safety Legislative requirement
Load and Load Chart
Operation safety and maintenance
Rigging and signalling
Case studies



What are the Benefits:

Proof of skills, competency
Proof of qualifications
Improved chances of employment
Enhanced health and employment



Course Fee:
*All course fee are before GST*

Test Level / Course Name Training Fee Test Fee Total Fee

Mini Crane Operation Course CSC Module 1 (Theory)

$250.00*

$110.00*

$360.00*

Mini Crane Operation Course CSC Module 2 (Practical)

$910.00*

$530.00*

$1440.00*

Mini Crane Operation Course SEC(K) (Theory & Practical)

$1160.00*

$640.00*

$1800.00*

Mode of Training: Classroom & Practical
Mode of assessment: Written Assessment & Practical Assessment


Funding Information:

This course is applicable for Workforce Training and Upgrading (WTU) scheme.

From 20 Jul 2018 onwards, applicant firms may submit funding applications in the respective online systems as listed below:

R&F level – application via One-Stop portal (https://www.bca.gov.sg/ams_public/)

PMET level-application via WTU online system (http://www.skillsfuture.sg/credit)

For more information on WTU scheme, you may visit BCA website at https://www.bca.gov.sg/manpower/wtu.html

 IPAF MEWPs for Managers
(E-Learning)



Book Now



IPAF MEWPs for Managers (E-Learning)

Free Validity Period: 14 Apr 2020 - 15 June 2020
Course Fee: S$192.60
Mode of Training: Online E-Learning
Mode of assessment: Online Assessment (30 MCQ)



Learning Objectives:

To equip the participant with the know how for safe use of MEWPs on site; from planning the job, conducting a risk assessment, selecting the right equipment and mitigating all possible risks.

Who should attend?

Managers, Foreman Supervisors, Safety Professions, any individual who intend to oversee, plan and manage the safe use of MEWPs on site.

Course Duration

5 hrs
Assessment: Online Assessment (30 MCQ)

Medium of Instruction
English


Certification:

Successful candidates will be issued a Preliminary Test Completion Receipt which acts as a temporary certificate for 28 days from date of issue
An official IPAF certificate will be issued thereafter. *Additional charges of $85.60 is applicable for official IPAF Certificate.



Course Content:

MEWP legislations and guidance
Rental terms and conditions
Machine types and use
Operator training and familiarisation
Operator daily inspection
MEWP personal fall protection
Safe operating methods and hazard awareness
Safety beyond training

 Environmental Infection Control And Management For COVID-19



Book Now



Environmental Infection Control And Management For COVID-19

Course Date: 1st June 2021
Course Fee: S$321.00 (inclusive GST)
Course Venue: Online / BS Tech Training Center



Learning Objectives:

This course aims to equip participants with knowledge and skills to perform cleaning and disinfection of non-healthcare premises to combat COVD-19 and other potential diseases.
In the first part of the course, participants will gain an overview of infectious diseases and principles of Personal Protective Equipment (PPE). Participants will also learn about the infection prevention and control, consideration in selection of appropriate PPE, the procedures in donning and doffing PPE and hand hygiene.
Cleaning and disinfection in non-hospital settings will be covered in the second half of the course. This will include general principles of cleaning and disinfection.

Who should attend?
General Cleaners
Cleaning Supervisors
Cleaning Operation Executives
Environment Health & Safety Specialist
Facility Management Supervisors
Facility Management Executives
Construction Contractor
Marine Personnel
Petrochemical Profession
Course Duration

1 Day Course (8 hours)

Medium of Instruction
English


Certification Obtained and Conferred By:

Participants will be awarded the Certificate of Attendance by Republic Polytechnic upon meeting 80% of the attendance.



Course Content:

Principles for the use of PPE
Types of PPE and their purpose
PPE recommendations for COVID-19 in non-hospital settings
Sequence for donning and doffing PPE
Proper disposal of used PPE
Good hygiene practices when using PPE
General Principles of cleaning & decontamination (high touch / low touch, risk assessment matrix)
MOH guidelines for cleaning & decontamination
Environmental cleaning process – general cleaning, disinfection
Sequence of cleaning & washdown routes
Choice of disinfectants & active reagents
Assessment

Overseas Training Center

Training Facilities

An important aspect of effective learning relates to creating a supportive learner environment. A safe and caring environment allows the participants connect to the activities conducted and get engage seriously in active participation.

 
TRAINERS
 
 
Boom Lift
 
 
Scissor Lift
 
 
Vertical Personnel Platform
 
 
Hazmat
 

Contact Us

Main Office
BS Technology Pte Ltd
5 Tuas Ave 3, BS Logistics Hub, Singapore 639405
Tel: 65-6416 1996
Fax: 65-6863 1944
Email: enquiries@bokseng-ipl.com
Training Enquiries
Training
5 Tuas Ave 3, BS Logistics Hub, Singapore 639405
Tel: 65-6416 2691
Fax: 65-6265 9717
Email: enquiries@bokseng-ipl.com
Operating Hours
Monday to Friday: 8.30am - 5.30pm
Saturday: 8.30am - 12.30pm
How to get there
Nearest MRT Station: EW 30 Gul Circle
Buses Available :
192, alight at bus stop no. 25201 - After Tuas Road
(Tuas Avenue 3)
193, alight at bus stop no. 25321 - YCH Distripark
(Tuas Avenue 5)

©Copyright 2017 - BS Technology Pte Ltd. All rights reserved.